vmware-server:
Easy installation of the rpm packages that were downloaded from vmware.com.
The configuration program vmware-config.pl but increases when creating the vmmon kernel module with the message "... invalid module format ..." out.
Cause: Incorrect kernel-devel package installed
Remedy:
kernel-devel.i586 uninstall and by yum install kernel-devel.i686 replace
then a symlink / usr / src / linux -> / usr/src/kernels/2.6.16-1.2133_FC5-i686 share
The configuration program is now running to the point where the port requested by the Console. This can be done if necessary, an exit, are not installed when inetd or xinetd. In this case, simply re-install via yum install xinetd Konfigprogramm and can run again.
Terratec Cinergy (DVB-S card):
Supported "out-of-the-box", but fighting at boot two drivers to physics. In effect, the TV reception is first not be lacking in / dev/dvb/adapter0 the necessary device nodes
Cause: The "Stradis" driver as kernel module loaded at startup
Remedy: in / etc / modprobe.d / blacklist the entry "blacklist Stradis" Add
After diving on the device nodes, but have the wrong Berechtigugen (root only access).
Cause: udev rules do not agree
Abfhilfe: Set in / etc/udev.d/rules.d/50-udev.rules the entry for tv on MODE = "666" . (Quite correctly would be a private. Rules file for this Purpose to create and to grant permission by GROUP and MODE so that not everyone is entitled to the device. Well, the man's just lazy ...) generate
kernel is:
Sometimes you need the header addition, the kernel sources. This per-packet rpm from fedora-updates parties during (eg: kernel-2.6.16-1.2122_FC5.src.rpm) are.
can be the sources with the following command in / usr/src/redhat/BUILD/kernel-2.6.16 Provided / After installing the package: rpmbuild-bp
- target = $ (uname-m) / usr / src/redhat/SPECS/kernel-2.6.spec
0 comments:
Post a Comment