Arcor offers - as well as many other providers - to telephone and Internet packages that are of a telecommunications connection completely independent. The monthly package price flat rates for telephony and Internet are included, so that the running costs remain well clear.
is the hook that Telekom independent packages not "real" voice connection (analog or ISDN) have (unless you booked and paid them extra), but the Internet telephony with voice over IP technology is realized. Basically, this technique is quite mature, so that telephone calls to good quality in sufficient can be made. A PC is not necessary to the "old" analogue equipment can still be used.
However, there are special in my view, the Arcor offers two fat toads swallow:
1) The one provided with the package Easybox A400 "is good in the current version is not really much: the VoIP voice quality moves at the level of Mobile content inappropriate and is marred by Hall on the side of the call.
The performance and stability when accessing the Internet are subjectively worse than for example in AVM Fritz Box.
2) You get the access of Arcor specifically indicated for the VoIP account. configure Instead you get a so-called installation code with the input of the Easybox. Although this system is absolutely foolproof, but prevents the use of existing hardware at Arcor's own port.
probably wants to have support by x-Arcor not any hardware configurations, but for power users should access be available in my opinion. operate
After some experimentation and study of "IP-Phone Forum I succeeded to install a Fritzbox 7050 WiFi connection and both the Arcor Internet or telephone order.
The following steps describe briefly how I proceeded to do so. Maybe this helps one or the other, the modest Easybox to discard. Thanks here one more time to the users of the IP-Phone-Forum, without whose contributions do not come so far I .
This follows what has worked for me, it can look at earlier / later switched connections or Easy boxes with newer firmware version (my h at 1.50.502) different!
Step 1: Installation of Arcor had hardware
Anschalttag Am I installed the supplied hardware as directed by Arcor and telephony and the Internet with the help of the modem installation codes "into operation.
Step 2: Read the configuration on the Arcor Easybox
To gain access to the access data for the connecting Arcor is useful to transfer the Easybox saved configuration to a file on the PC and analyzed. For this we open a browser to the URL http://arcor.easybox/ and navigates to the menu item "Tools" / "remote". There bef is indet, select "Save settings" with which you can download "arcor_config.bin" the file from the box.
Step 3: Analysis of Konfgurationsda tei
can arcor_config.bin The file is best to edit with a hex editor such as WinHex . First, the file byte with the value 0xFF XORed (or simply bitwise inverted) be able to read the data in plain text. In WinHex this goes with the menu option "E dit / Modify Data"
at the following addresses within the file, the credentials are now in plain text:
0x0B20C ATM1 Login
0x0B290 ATM1 password
0x0B428 PPPoE2 Login
0x0B4AC PPPoE2 password
0x15F36 VoIP Login Password
0x15E74
0x15F66 VoIP SIP proxy
0x15E34 SIP registrar
Here again the steps in WinHex in pictures (click on the pictures enlarges each):
First, the file is loaded arcor_config.bin via File / Open. is then the menu item "Edit / Modify Data" is called and the following dialogue ...
... choose the Invert bits selected. Now the file in plain text and can be read at the top of addresses released the relevant information.
For example, to get the SIP registrar, it scrolls the file to the address 0x15E34, which is the fastest in WinHex using the "Edit / Go To" and ... 
... entering 15E34. The cursor is located exactly at the position in imaging and ... 
you can read on the right side of the corresponding plaintext. Step 3: change from Arcor have hardware on the Fritz Box
Hardware by Arcor I TAE now separated from the can, the network and the phone! and only connected the power supply left if necessary to quickly switch back to back.
The Fritz! Box is described in the manual with the telephone box connected, that is, first, the splitter is connected to the can and out the Fritz Box. Will that work without a splitter I have not tried it. Since at present no voice signal Arcor connection (ISDN or analog) I have not connected the wiring required for this, ie, no NT or TAE cable connected between splitter and FritzBox.
On the Fritz Box is now on the phone and the network is connected, then plugged the power supply. ! Fritz Box begins with a multi-minute "Director of Training"; once the "Power" light stops flashing, it is done.
Step 4: Configure the Fritz Box
First, I entered the account information for the Internet in a Box Fritz!. For this, open the URL http://fritz.box in the browser, navigate to the menu item "Settings / Internet / Access" and choose "Connection Settings" from the drop-down menu, the other Internet provider ". In
username and password to wear a top of the values determined for ATM1 login / password.
After clicking "Apply" should be able to surf via DSL.
is more complex configuration VoIP access, because here are some more settings are required:
- Kicking In "Settings / telephony / Dialing Rules" zuerstmal everything. I was here a cheap pre registered for the landline, calls out to the Internet by preventing first.
- Under " Settings / telephony / Internet Telephony" now remove all the entries and add a new one.
- On the screen the mask have the following settings works for me:
- Checked "use Internet telephony in
- Internet telephony providers' other Provider "
- Internet number: The phone number without area code (old landline number)
- Username: Area code and phone number written together with a leading zero as described above in a VoIP Login determined
- password / password confirmation: The values above for VoIP Password identified
- Registrar: arcor.de
- Proxy:
\u0026lt;vorwahl> sip.arcor.de so bswp 0987.sip.arcor.de
-
"Use Internet number registration for" No check mark in -
check "Custom number format" when in those parts of the area code, so for example "0" "9876"
Step 5: test
both incoming and outgoing calls are now working on the Fritz Box. Bingo.
0 comments:
Post a Comment